[EvoErik]

Header: 7DF
PID: 015C
Equation: A + B/256 - 40

Thanks! Meanwhile, I was using A-40, following https://en.wikipedia.org/wiki/OBD-II_PIDs

 

[883]

Anyone got the pid for CACT? Thanks

 

[883]

anyone..?

 

[AP756]

Torque can show CACT, it's implemented. Unfortunately there is no easy way to just read out the PID number and settings, these are "internal" factors. Someone with some spare time will be able to extract...

Bye for now Fred

 

[MagnusT]

anyone..?

I read it with OBD2 standard pid (x77) https://en.m.wikipedia.org/wiki/OBD-II_PIDs But I guess you want Toyota specific CAN PID?

 

[883]

I read it with OBD2 standard pid (x77) https://en.m.wikipedia.org/wiki/OBD-II_PIDs But I guess you want Toyota specific CAN PID?

thanks need to check if that standard works

 

[MagnusT]

thanks need to check if that standard works

It works ? I logg it in Racechrono

 

[883]

It works ? I logg it in Racechrono

View attachment 39869

good stuff hope we get it sorted aswell!

 

[DatRobot]

Does anybody know the pid for the current gear ?
Thanks

 

[AP756]

There is none (no position sensor). You can program it yourself using vehicle speed and revolutions.
Bye for now Fred

 

[iecku]

Hey

Has anyone found the PID´s for Knock Retard and Wastegate Dutycycle.

My car has a remap with full inlet and exhaust mods. Sometimes it feels like there is some knock retard and the car is also not doing consistent boost. Sometimes it does 1,8bar till 6k falling to 1,5bar....and some minutes later just doing 1,4bar falling to 1,2bar.

 

[nightoftune]

Has someone got the TPMS Sensors working with the temperature PID? I tried it multiple times with torque but i dont get pressure or temperature.

 

[terryo]

reading most of this thread seems to suggest there is no Android application that works "out of the box" for the GR. ive played with ToroquePro but been unable to get the data like intake air temp to display correctly. it appears to be grabbing the wrong data or have the wrong equation. has anyone found a workable Android based solution to get most/all of the GR CANBUS data??

 

[terryo]

Great finds dvim!

I guess you all have the list of OBD2 items that the GRY actually transmits, but I ran a scan and thought I'd post it for reference. Some GPS and other sensor data from the Android phone are always included in the Torque app also.

View attachment 21365

i see there are 2 transmission temperatures listed. my version of Torque Plus, downloaded last week, does not have either of these. any comment??

im also trying to work out if there is a PID for the individual wheel speed sensors. anyone care to comment??

 

[R-power]

dears,
asking this.
(hope it is in topic)

is there a way to log a data?
just to say, rpm in a track session?
in order to check later on how many gear shift up and down near rpm limiter ?

may be used an obd app like a log ?
which <pp and in which way ?

thx so much to anyone

 

[Reyanth]

dears,
asking this.
(hope it is in topic)

is there a way to log a data?
just to say, rpm in a track session?
in order to check later on how many gear shift up and down near rpm limiter ?

may be used an obd app like a log ?
which <pp and in which way ?

thx so much to anyone

Torque Pro on android at least.. can log anything you can read from OBD. But I'm sure there are others too, and maybe better ones?

 

[R-power]

dears....

i am having an issue
and ask to this community looking for help
i have used all the PIDS here with torque pro, super
then i have bought canchecked and i am having same info, MAINLY CLUTCH DIFF TEMP
the named "Temperature Sensor Value in Coupling"

now i have added to the car the Syvecs AWD controller (simply remove cables under rear seat from oem awd controller and connect this syvecs)


but unfortunately the "Temperature Sensor Value in Coupling" is disappeared both from canchecked than from torque pro

syvecs says that this info come not from CANBUS but from OBD
they tried several times but they do not understand how fix it, they do not find "the channel, the signal"

do someone may help me
or give me suggestions ?

shall i open a dedicated topic?
and if yes, where ??
thx u all so much for support

here syvecs awd controller

Syvecs AWD / 4WD Controller – Toyota Yaris GR 2020-2023 – Syvecs Powertrain Control

www.syvecs.com

 

[MRA3]

dears....

i am having an issue
and ask to this community looking for help
i have used all the PIDS here with torque pro, super
then i have bought canchecked and i am having same info, MAINLY CLUTCH DIFF TEMP
the named "Temperature Sensor Value in Coupling"

now i have added to the car the Syvecs AWD controller (simply remove cables under rear seat from oem awd controller and connect this syvecs)


but unfortunately the "Temperature Sensor Value in Coupling" is disappeared both from canchecked than from torque pro

syvecs says that this info come not from CANBUS but from OBD
they tried several times but they do not understand how fix it, they do not find "the channel, the signal"

do someone may help me
or give me suggestions ?

shall i open a dedicated topic?
and if yes, where ??
thx u all so much for support

here syvecs awd controller

Syvecs AWD / 4WD Controller – Toyota Yaris GR 2020-2023 – Syvecs Powertrain Control

www.syvecs.com

Hi, have you found the solution for this issue with Syvecs AWD? I use OBD fusion to see rear diff temperatures and am purchasing the syvecs awd ad don’t want to lose that feature…

 

[khomkolov]

Hello everyone!
is there any way to tell if a car is currently on neutral gear via CAN?
especially when the car is off (no ignition)

 

[Michael-GR]

There is none (no position sensor). You can program it yourself using vehicle speed and revolutions.
Bye for now Fred

Can you explain how this is done on the obelink app