Toyota GR Yaris Forum banner
Cancel
Create thread New Garage Forums

The GR Yaris Wheels Thread

3 reading
Jump to Latest
621 - 640 of 1,855 Posts
#625 ·
Phil1291 said:
I wonder that nobody mentioned the Weds TC 105X...

Had these on my previous Racecar and they're super lightweight, can take a beating and are, in my opinion, one of the most beautiful wheels.
I'll get my car in about two weeks and my wheels in three.

View attachment 8836
Click to expand...
I got a set of these in 9.5x18 with a custom +39ET to keep the scrub radius within reason. Still waiting for hub rings and some decent nuts (seen the posts in this thread regarding nuts). I did a quick fit, but the picture isn't the best:

Image
 
#626 ·
Woznaldo said:
I got a set of these in 9.5x18 with a custom +39ET to keep the scrub radius within reason. Still waiting for hub rings and some decent nuts (seen the posts in this thread regarding nuts). I did a quick fit, but the picture isn't the best:

View attachment 9584
Click to expand...
Lovely wheels ?? can we get some better pics pls?
 
  • Like
Reactions: Woznaldo
Save
Reply Quote Like Like
#635 ·
So I'm tying myself in knots WRT to wheels, tyre sizes, geometry and was wondering if someone with a bit more knowledge can give some feedback on the following wheel/tyre combo.

99% going to go for gold RPF1 which are only available in 18/8.5/40, and then I'm looking at 245/40/18 tyres (CUP2 or ADO8) or 235/40/18 (PS4S)

My concern is the wheels won't fill the arches and RPF1 can look lost if they don't fill the arches and also the potential knock effect to the geometry.
 
#636 ·
With 8.5“ +40 you‘ll have at least 15mm space left to the outer wheel arches.
I‘ve got 8.5“ +32 with 235/40 CUP 2(not fitted yet) which will stick out nearly the same as a 9.5“ +45 with 255 or 265/35 will do.
There are people who have 9.5“ +39 and they still fit, but stick out ~14mm more than your choice of wheel with 8.5“ +40.

So yeah. Your wheels won‘t fill the arches...
 
#637 ·
paulmo said:
So I'm tying myself in knots WRT to wheels, tyre sizes, geometry and was wondering if someone with a bit more knowledge can give some feedback on the following wheel/tyre combo.

99% going to go for gold RPF1 which are only available in 18/8.5/40, and then I'm looking at 245/40/18 tyres (CUP2 or ADO8) or 235/40/18 (PS4S)

My concern is the wheels won't fill the arches and RPF1 can look lost if they don't fill the arches and also the potential knock effect to the geometry.
Click to expand...
They're also available in an 18/8.5/ET30in the other colours but I think they'll maybe be borderline too wide on the front

1619080170707.png
 
#639 ·
Phil1291 said:
With 8.5" +40 you'll have at least 15mm space left to the outer wheel arches.
I've got 8.5" +32 with 235/40 CUP 2(not fitted yet) which will stick out nearly the same as a 9.5" +45 with 255 or 265/35 will do.
There are people who have 9.5" +39 and they still fit, but stick out ~14mm more than your choice of wheel with 8.5" +40.

So yeah. Your wheels won't fill the arches...
Click to expand...
Does the scrub radius change quite a bit with ET32? Sure the tyre is a bit taller than stock, but still?
 
#640 ·
Andy R said:
Does the scrub radius change quite a bit with ET32? Sure the tyre is a bit taller than stock, but still?
Click to expand...
It does yes. It moves outwards (to the positive side of it) about 12mm.
The taller tire will lift the car about 4mm and the difference to OEM is about +1,3% which is, in my eyes, acceptable.
We'll see how that changes the dynamics of the car.
 
621 - 640 of 1,855 Posts
About this Discussion
1.9K Replies
338 Participants
Last post:
Masonginbo
Toyota GR Yaris Forum
posts
171K
members
7.3K
Since
2020
A forum community dedicated to Toyota GR Yaris owners and enthusiasts. Come join the discussion about performance, hot hatch modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General Discussion Engine / Performance / Exhausts New Members Footwork / Suspension / Chassis Exterior / Body Styling / Aerodynamics